? Multiple adjustable pressures
? Direct-acting, used for limiting system pressure
? With built-in amplifier, adjustable ramp signal generation time for pressure increase and decrease
? Suitable for injection molding machines and other applications where pressure is required
| Fluid | Mineral oil suitable for NBR and FKM seal | |
| Phosphate ester for FKM seal | ||
| Fluid temperature range | ℃ | -30 to +80 (NBR seals) |
| -20 to +80 (FKM seals) | ||
| Viscosity range | mm2/s | 15 to 380 |
| Degree of contamination | Maximum permissible degree of fluid contamination: Class 9. | |
| Max. operating pressure (Port P) | bar | 350 |
| Max. setting pressure | bar | 50; 100; 200; 315; 350 |
| Min. settable pressure | See characteristic curves | |
| Min. settable pressure at 0 command value | =Min. settable pressure | |
| Return pressure(Port T) | bar | Separate and at zero pressure to tank |
| Max. flow-rate | L/min | 2 |
| Linearity | ± 3.5 % of max. settable pressure | |
| Hysteresis | ± 1.5 % of max. settable pressure | |
| Repeatability | ＜ ± 2 % of max. settable pressure | |
| Switching time | ms | 30 to 150 (system dependent) |
ADD: Address: No. 81, Zhuhang Road, Minhang District, Shanghai（Shanghai Lixin Hydraulics Co., Ltd.)
TEL: 021-31616718 Tel: 021-31616718, ext. 8000 ( reception )
? 2023 Shanghai Lixin Hydraulics Co., Ltd. copyright hu13042344
